219_7505
Super high powered backpack dredge with a lightweight, heavy-duty 2.5hp Honda 4 cycle engine. Dredge produces 100 gallons per minute and 161 feet of head pressure. Sluice box is specifically engineered for fine gold recovery and easy clean up. Constructed with aluminum frame and either inflatable or Marlex pontoons. Comes equipped with a power jet or optional suction nozzle.
210_140 Mini Vibrostatic Drywasher
17325 2½” High Banker /Dredge
1753 3” High Banker / Dredge
263 Air Compressor (6.0 CFM)
This is one heavy duty, Teflon piston compressor with pressure
relief valve. This compressor is recommended for deep diving,
dredging, urchin and cucumber diving, hull cleaning, boat and
dock maintenance, crustacean harvesting or even spear fishing.
Comes complete with pulley and produces 6 CFM at free air or
5 CFM at 40 PSI. Accommodates up to 3 divers. Recommended
RPM is 1450. Weight 19 lbs.
3400PH 3” Mini Dredge 4HP Honda p104
552_A51DR
Dredging Riffle
Larger, deeper sluice riffle tray for A52 and A51sluice box riffle
for dredging
553_A52DR
Dredging Riffle
Larger, deeper sluice riffle trap for A52 and A52 sluice box riffle
for dredging
554_AH30
Diving Air Hose – Price based on length
Kink resistant, heavy duty air hose is optic yellow for high visibility
And floats to reduce tangles. Comes coupled with ¼” female ends.
Maximum working pressure of 250 PSI with burst pressure of
1000 PSI
560_
Foot Valves with Strainer
Molded Marlex foot valve includes a plated steel strainer
FV14 Foot Valve 1 ¼”
FV15 Foot Valve 1 ½”
FV20 Foot Valve 2”
FV25 Foot Valve 2 ½”
FV40 Foot Valve 4”
FV50 Foot Valve 5”
566_H2
Harness
This harness consist of an adapter for air line and a quick release
buckle. This harness is a must for safety as it prevents pull on the
regulator and keeps the air line out of the diver’s way.
570_
Low Pressure Air System
These kits include a reserve tank, air hose, harness, quick release
connector and all fittings to adapt to your selection of reserve tank.
Low Pressure Kits include a RT1 Reserve Tank for T80 compressor
571_P103H
P103H Model Pump
he P103H pump is a 4 HP Honda Motor with a Keene P100 pump
with 2inch inlet and 1 ¼ inch outlet maximum 150 GPM with 145
ft max lift. Total weight 32 lbs.
572_P185H
P-180 Pump W/6.5 Honda
The P185H has a 6.5 HP Honda with a
Has 2.5” inlet and 2” outlet rated at 300 GPM at 180 ft max lift
Total weight 38 lbs.
573_PF25
2.5” Pontoon Float
574_PF2I
2004 Inflatable Pontoon Only
575_PF45S
Pontoon Only (New 4 Short Float)
576_PF5
5” & 6” Float Marlex
577_PJ
Power Jets
The most effective way to create suction. The suction jet produces
a strong vacuum to move material and water from one place to another.
Jet sizes determine suction hose size and allows the hose to fit over
the end of the suction tube
578_FJ
Flare Jets
Jet flares increase suction power, reduce the chances of rock jams
and increase over all recovery. They can be maneuvered and operate
in very shallow water by pivoting up between floats to clear any
obstructions. They are easily and quickly assembled with only five
wing nuts. Made of molded rugged light weight Marlex plastic.
Stainless steel clamps included.
579_SB
Sluice boxes
Jet flare sluice boxes have been designed to work with our jet flare
And features heavy duty latches. A lighter design for portability as
Well as rolled top edges for superior strength. The sluice includes a
large classifying screen that covers nearly half of the riffle section,
rubber ribbed matting that provides for quick identification of
values, miners moss for greater fine gold recovery and wire mesh
screen over ribbed carpet to give you simply superb fine gold recovery
580_SN
Suction Nozzles
Ideal for use in shallow water conditions
581_SST
Suction Swivel Tips
Swivel Suction Hose Tips is an absolute must for the serious dredger.
The tip moves without turning the hose, making handling and
maneuverability so much easier.
582_ST
Dredge Hose Suction Tips
Suction hose dredging tip is constructed of plated steel and features
a rolled tip which will reduce rock jams by up to 20%. The 5 inch
tip features a gripping handle
595_HBCKE
P-90G Pump Kit
Includes Honda 2.5 hp, r4 cycle engine and pump, intake foot valve assembly and 25 feet of 1.25 inch nylobraid pressure hose. Provides great power for even a 2 ½” dredge. Weight 30 lbs.
596_HBCKF
Sluice box Frame with Adjustable Support Legs
The quick release frame adapts to an A51 or A52 sluice box in seconds. A stable platform with adjustable legs for uneven ground. Weight 4 lbs.
597_HBCKH
Power Sluice Conversion Kit
Marlex hopper with an adjustable classifier, spray bar, built-in adjustable water flow and pressure port controls. For A51 or A52 sluice. Weight 10 lbs.
598_HBCS
Classifying Screen
For use with A52 and A51 sluice box riffle for dredging. Weight 2 lbs.
602_RT1
Low Pressure Reserve Tank
A three gallon Marlex polymer plastic reserve tank that can accommodate two divers. Resists corrosion and rust. Includes two ¼” ports and has a working pressure of 60 PSI. Dimensions are 10” long x 7 ½” diameter.
603_RT4
4 Gallon High Pressure Reserve Tank
Stainless steel reserve tank is capable of accommodating either one or two divers. Equipped with two ¼” ports and has a working pressure of 125 PSI. Dimensions 21” long x 13” diameter x 9 ½” tall.
604_STE2F
A52 Jet Flare Adapter
Sluice trough extension is necessary when adapting a 2 inch jet flare hope to an A52 sluice box. Weight 6 lbs.
605_STE25F
A52 Jet Flare Adapter
2 ½” Jet Flare adapter, when adapting a 2 ½” jet flare hopper to an A52 sluice box. Weight 7 lbs.
606_STE
Sluice Extension
A sluice trough extension is necessary when adapting a power sluice hopper to an A52 sluice box. Weight 2 lbs.
607_T80
Medium Duty Air Compressor
This is a medium duty diaphragm compressor with pressure relief valve. The T80 compressors are recommended for shallow diving conditions. Factory recommended RPM is 1800. For single diver use only. Produces 1.8 CFM at 45 PSI. Pulley not included.